Why Is Why Laptop’s (MSI 16R1) SSD Not Showing Up In The BIOS Boot Order?

by ADMIN 74 views

Introduction

Are you experiencing issues with your MSI 16R1 laptop's SSD not showing up in the BIOS boot order? You're not alone. Many users have reported similar problems, and in this article, we'll explore the possible causes and solutions to get your SSD recognized in the BIOS.

Symptoms

  • Your MSI 16R1 laptop was working fine until it suddenly stopped booting from the SSD.
  • When you turn on your laptop, it searches for media and goes to the BIOS screen.
  • You've tried resetting the EC (Embedded Controller) and setting the BIOS to default, but the SSD still doesn't show up in the boot order.

Possible Causes

1. BIOS Settings

The BIOS settings might be the culprit behind your SSD not showing up in the boot order. Here are a few possible reasons:

  • SSD not enabled: Make sure that the SSD is enabled in the BIOS settings. You can do this by going to the BIOS settings, navigating to the "Advanced" or "Boot" tab, and looking for the "SSD" or "AHCI" option. Ensure that it's set to "Enabled" or "AHCI".
  • Boot order not set correctly: Check that the SSD is set as the first boot device in the BIOS settings. You can do this by going to the BIOS settings, navigating to the "Boot" tab, and looking for the "Boot Order" or "Boot Priority" option. Ensure that the SSD is set as the first device.

2. EC (Embedded Controller) Issues

The EC is a small controller that manages the laptop's hardware components. If the EC is malfunctioning, it might prevent the SSD from showing up in the BIOS boot order. Here are a few possible reasons:

  • EC reset not successful: If you've tried resetting the EC and it didn't work, it's possible that the reset wasn't successful. Try resetting the EC again, and this time, make sure to follow the correct procedure.
  • EC firmware issues: The EC firmware might be outdated or corrupted, which could be causing the issue. Try updating the EC firmware to the latest version.

3. Hardware Issues

There might be a hardware issue with your laptop's SSD or other components that's preventing it from showing up in the BIOS boot order. Here are a few possible reasons:

  • SSD failure: It's possible that the SSD has failed and is no longer recognized by the BIOS. Try replacing the SSD with a new one to rule out this possibility.
  • RAM issues: Faulty RAM can cause issues with the BIOS and prevent the SSD from showing up in the boot order. Try removing the RAM and reseating it to rule out this possibility.

4. BIOS Update Issues

If you've recently updated your BIOS, it might be causing the issue. Here are a few possible reasons:

  • BIOS update not successful: If the BIOS update didn't complete successfully, it might have caused the issue. Try updating the BIOS again, and this time, make sure to follow the correct procedure.
  • BIOS update issues: The BIOS update might have introduced a bug that's preventing the SSD from showing up in the boot order. Try rolling back the BIOS to a previous version to rule out this possibility.

Solutions

1. Reset the EC

Resetting the EC might resolve the issue. Here's how to do it:

  1. Shut down your laptop.
  2. Press the power button to turn it on.
  3. Immediately press the F2 key to enter the BIOS settings.
  4. Navigate to the "Advanced" or "Boot" tab.
  5. Look for the "EC Reset" or "Embedded Controller Reset" option.
  6. Select "Yes" or "OK" to reset the EC.
  7. Save the changes and exit the BIOS settings.

2. Update the BIOS

Updating the BIOS might resolve the issue. Here's how to do it:

  1. Download the latest BIOS update from the MSI website.
  2. Follow the instructions provided with the BIOS update to update the BIOS.
  3. Make sure to follow the correct procedure to avoid any issues.

3. Check the SSD

If the SSD is not showing up in the BIOS boot order, it's possible that the SSD has failed. Try replacing the SSD with a new one to rule out this possibility.

4. Check the RAM

Faulty RAM can cause issues with the BIOS and prevent the SSD from showing up in the boot order. Try removing the RAM and reseating it to rule out this possibility.

Conclusion

In conclusion, the SSD not showing up in the BIOS boot order on your MSI 16R1 laptop can be caused by a variety of factors, including BIOS settings, EC issues, hardware problems, and BIOS update issues. By following the solutions outlined in this article, you should be able to resolve the issue and get your SSD recognized in the BIOS.

Additional Tips

  • Make sure to back up your data before attempting any solutions.
  • If you're not comfortable with updating the BIOS or resetting the EC, it's recommended that you seek the help of a professional.
  • If the issue persists after trying the solutions outlined in this article, it's possible that there's a hardware issue with your laptop that requires professional attention.

Frequently Asked Questions

Q: Why is my SSD not showing up in the BIOS boot order?

A: There could be several reasons why your SSD is not showing up in the BIOS boot order, including BIOS settings, EC issues, hardware problems, and BIOS update issues.

Q: How do I reset the EC?

A: To reset the EC, shut down your laptop, press the power button to turn it on, immediately press the F2 key to enter the BIOS settings, navigate to the "Advanced" or "Boot" tab, look for the "EC Reset" or "Embedded Controller Reset" option, and select "Yes" or "OK" to reset the EC.

Q: How do I update the BIOS?

A: To update the BIOS, download the latest BIOS update from the MSI website, follow the instructions provided with the BIOS update to update the BIOS, and make sure to follow the correct procedure to avoid any issues.

Q: What if the issue persists after trying the solutions outlined in this article?

Q: Why is my SSD not showing up in the BIOS boot order?

A: There could be several reasons why your SSD is not showing up in the BIOS boot order, including BIOS settings, EC issues, hardware problems, and BIOS update issues. It's essential to troubleshoot the issue to determine the root cause.

Q: How do I reset the EC?

A: To reset the EC, follow these steps:

  1. Shut down your laptop.
  2. Press the power button to turn it on.
  3. Immediately press the F2 key to enter the BIOS settings.
  4. Navigate to the "Advanced" or "Boot" tab.
  5. Look for the "EC Reset" or "Embedded Controller Reset" option.
  6. Select "Yes" or "OK" to reset the EC.
  7. Save the changes and exit the BIOS settings.

Q: How do I update the BIOS?

A: To update the BIOS, follow these steps:

  1. Download the latest BIOS update from the MSI website.
  2. Follow the instructions provided with the BIOS update to update the BIOS.
  3. Make sure to follow the correct procedure to avoid any issues.
  4. Save the changes and exit the BIOS settings.

Q: What if I'm not comfortable with updating the BIOS or resetting the EC?

A: If you're not comfortable with updating the BIOS or resetting the EC, it's recommended that you seek the help of a professional. They can assist you in troubleshooting the issue and resolving it safely.

Q: Can I use a different SSD if the original one is faulty?

A: Yes, you can use a different SSD if the original one is faulty. However, make sure to back up your data before attempting to replace the SSD. Additionally, ensure that the new SSD is compatible with your laptop's hardware and BIOS settings.

Q: How do I check if my RAM is faulty?

A: To check if your RAM is faulty, follow these steps:

  1. Shut down your laptop.
  2. Remove the RAM modules from the laptop.
  3. Inspect the RAM modules for any signs of physical damage.
  4. Try reseating the RAM modules to ensure they are securely connected.
  5. If the issue persists, try replacing the RAM modules with new ones.

Q: Can I use a different type of RAM if the original one is faulty?

A: Yes, you can use a different type of RAM if the original one is faulty. However, make sure to check the compatibility of the new RAM with your laptop's hardware and BIOS settings.

Q: How do I troubleshoot BIOS issues?

A: To troubleshoot BIOS issues, follow these steps:

  1. Check the BIOS settings to ensure that they are set correctly.
  2. Update the BIOS to the latest version.
  3. Reset the EC to its default settings.
  4. Check for any firmware updates for the EC.
  5. If the issue persists, try resetting the BIOS to its default settings.

Q: Can I use a different BIOS version if the original one is faulty?

A: Yes, you can use a different BIOS version if the original one is faulty. However, make sure to check the compatibility of the new BIOS version with your laptop's hardware and ensure that it is the latest version.

Q: How do I back up my data before attempting to resolve the issue?

A: To back up your data, follow these steps:

  1. Connect an external hard drive or USB drive to your laptop.
  2. Copy all your important files and data to the external hard drive or USB drive.
  3. Make sure to back up your data regularly to prevent data loss.

Q: Can I use a different operating system if the original one is faulty?

A: Yes, you can use a different operating system if the original one is faulty. However, make sure to check the compatibility of the new operating system with your laptop's hardware and BIOS settings. Additionally, ensure that you have a valid license for the new operating system.