AT-12: Selecting Start And Destination Points
Introduction
In this user flow acceptance test, we will be exploring the functionality of selecting start and destination points in the application. This test is designed to ensure that the application is functioning as expected when users interact with the map to select their starting and destination points. The test will cover various scenarios, including selecting points by clicking on buildings and typing in names.
User Flow Acceptance Test
Scenario: Selecting start and destination points by clicking on buildings
Given the map has multiple buildings marked When the user clicks on a building to select it as the starting point Then the application should display the selected building as the starting point
In this scenario, the user is presented with a map that has multiple buildings marked. The user clicks on a building to select it as the starting point. The application should then display the selected building as the starting point. This is a crucial step in the user flow, as it allows the user to specify their starting location.
To ensure that the application is functioning correctly, we need to verify that the selected building is displayed as the starting point. This can be done by checking the application's UI and ensuring that the selected building is highlighted or marked as the starting point.
Scenario: Selecting start and destination points by typing names
Given the map has multiple buildings with names When the user types in the name of a building to select it as the starting point Then the application should display the selected building as the starting point
In this scenario, the user is presented with a map that has multiple buildings with names. The user types in the name of a building to select it as the starting point. The application should then display the selected building as the starting point.
This scenario is similar to the previous one, but instead of clicking on a building, the user is typing in the name of the building to select it as the starting point. The application should be able to match the user's input with the building's name and display it as the starting point.
Scenario: Selecting start and destination points by clicking on buildings (destination)
Given the map has multiple buildings marked When the user clicks on a different building to select it as the destination point Then the application should display the selected building as the destination point
In this scenario, the user is presented with a map that has multiple buildings marked. The user clicks on a different building to select it as the destination point. The application should then display the selected building as the destination point.
This scenario is similar to the first one, but instead of selecting the starting point, the user is selecting the destination point. The application should be able to display the selected building as the destination point.
Scenario: Selecting start and destination points by typing names (destination)
Given the map has multiple buildings with names When the user types in the name of a different building to select it as the destination point Then the application should display the selected building as the destination point
In this scenario, the user is presented with a map that has multiple buildings with names. The user types in the name of a different building to select it as the destination point. The application should then display the selected building as the destination point.
This scenario is similar to the second one, but instead of selecting the starting point, the user is selecting the destination point. The application should be able to match the user's input with the building's name and display it as the destination point.
Scenario: Route planning based on start and destination points
Given the starting and destination points have been selected When the user requests for route information Then the application should display a route from the starting point to the destination point
In this scenario, the user has selected both the starting and destination points. The user then requests for route information. The application should then display a route from the starting point to the destination point.
This scenario is the final step in the user flow, where the user requests for route information based on the selected start and destination points. The application should be able to display a route that connects the two points.
Conclusion
In conclusion, the AT-12 test is designed to ensure that the application is functioning correctly when users interact with the map to select their starting and destination points. The test covers various scenarios, including selecting points by clicking on buildings and typing in names. The application should be able to display the selected building as the starting or destination point, and display a route from the starting point to the destination point when requested.
Recommendations
Based on the test results, the following recommendations are made:
- The application should be able to display the selected building as the starting or destination point.
- The application should be able to match the user's input with the building's name and display it as the starting or destination point.
- The application should be able to display a route from the starting point to the destination point when requested.
Future Work
Future work should focus on improving the user experience by making it easier for users to select their starting and destination points. This can be achieved by improving the map's UI and adding more features to make it easier for users to interact with the map.
Limitations
The test has some limitations, including:
- The test only covers a limited number of scenarios.
- The test does not cover all possible edge cases.
- The test does not cover the application's performance under heavy load.
Conclusion
Introduction
In our previous article, we explored the user flow acceptance test for selecting start and destination points in the application. In this article, we will be answering some of the most frequently asked questions related to this test.
Q: What is the purpose of the AT-12 test?
A: The purpose of the AT-12 test is to ensure that the application is functioning correctly when users interact with the map to select their starting and destination points.
Q: What scenarios are covered in the AT-12 test?
A: The AT-12 test covers the following scenarios:
- Selecting start and destination points by clicking on buildings
- Selecting start and destination points by typing names
- Selecting start and destination points by clicking on buildings (destination)
- Selecting start and destination points by typing names (destination)
- Route planning based on start and destination points
Q: How does the application determine the starting and destination points?
A: The application determines the starting and destination points based on the user's input. The user can select the points by clicking on buildings or typing in names.
Q: What happens if the user selects a building that is not on the map?
A: If the user selects a building that is not on the map, the application should display an error message indicating that the building is not found.
Q: Can the user select multiple starting and destination points?
A: No, the user can only select one starting and destination point at a time.
Q: How does the application display the route from the starting point to the destination point?
A: The application displays the route from the starting point to the destination point using a map view. The route is highlighted in a different color to make it easier for the user to follow.
Q: Can the user customize the route displayed by the application?
A: Yes, the user can customize the route displayed by the application by selecting different options such as route type, mode of transportation, and route preferences.
Q: What are the benefits of using the AT-12 test?
A: The benefits of using the AT-12 test include:
- Ensuring that the application is functioning correctly when users interact with the map to select their starting and destination points
- Identifying and fixing bugs related to the application's map functionality
- Improving the user experience by making it easier for users to select their starting and destination points
- Enhancing the application's overall performance and reliability
Conclusion
In conclusion, the AT-12 test is an important step in ensuring that the application is functioning correctly when users interact with the map to select their starting and destination points. The test covers various scenarios and provides valuable insights into the application's functionality. By answering some of the most frequently asked questions related to this test, we hope to have provided a better understanding of the AT-12 test and its benefits.
Frequently Asked Questions
- Q: What is the AT-12 test? A: The AT-12 test is a user flow acceptance test designed to ensure that the application is functioning correctly when users interact with the map to select their starting and destination points.
- Q: What scenarios are covered in the AT-12 test?
A: The AT-12 test covers the following scenarios:
- Selecting start and destination points by clicking on buildings
- Selecting start and destination points by typing names
- Selecting start and destination points by clicking on buildings (destination)
- Selecting start and destination points by typing names (destination)
- Route planning based on start and destination points
- Q: How does the application determine the starting and destination points? A: The application determines the starting and destination points based on the user's input. The user can select the points by clicking on buildings or typing in names.
- Q: What happens if the user selects a building that is not on the map? A: If the user selects a building that is not on the map, the application should display an error message indicating that the building is not found.
- Q: Can the user select multiple starting and destination points? A: No, the user can only select one starting and destination point at a time.
- Q: How does the application display the route from the starting point to the destination point? A: The application displays the route from the starting point to the destination point using a map view. The route is highlighted in a different color to make it easier for the user to follow.
- Q: Can the user customize the route displayed by the application? A: Yes, the user can customize the route displayed by the application by selecting different options such as route type, mode of transportation, and route preferences.
- Q: What are the benefits of using the AT-12 test?
A: The benefits of using the AT-12 test include:
- Ensuring that the application is functioning correctly when users interact with the map to select their starting and destination points
- Identifying and fixing bugs related to the application's map functionality
- Improving the user experience by making it easier for users to select their starting and destination points
- Enhancing the application's overall performance and reliability